Main Feature

1. A camera is installed inside the protective cover to oversee real-time operation within the cover and shoot any possible problems timely.  
2. The machine owns perfect cooling system, lubrication system and dust removal system, which make sure the machine can operate stably,efficiently and durably.
3. There is a casting beam with the machine that makes it more rigid, stable and shockproof.
4. The machine is capable of automatic height adjustment to maintain constant focal length and stable cutting quality. 
5. The machine can be used for cutting a variety of metals with excellent and stable cutting quality.
6. With a specialized CAD / CAM automatic programming software and automatic nesting software, it is possible to maximally g save raw materials. 
7. A camera is installed inside the protective cover to oversee real-time operation within the cover and shoot any possible problems timely. 

Fully understand from different views by 360-degree showing

Demo video, learn more about the product

Technical Parameters

Model P1530T Option
Working Area 1500x3000mm According to demands
Effective Pipe Cutting Length 3000mm/6000mm
Laser Output Power 500w/800w/1000w/1500w/2000w/2500W/3000w
Positioning Accuracy 0.03mm
Reposition Accuracy 0.02mm
Max.Moving Speed 100m/min
Max.Cutting Speed 35m/min
Min. line width 0.1mm

WIFI Wireless Control

For speedy service, we add WIFI function for our technician to operate troubleshooting and adjust parameters remotely. 
Check laser source parameters to analyze failure causes.
Check cutting parameters to analyze and adjust new parameters.

Switzerland RAYTOOLS Laser Head

Rotary Knob type focus point adjustment for fine and flexible adjustment. Adjustable range: 20mm, accuracy: 0.05mm.
Drawer type mirror seat to make protect glass replacing faster and easier.
Both collimating lens and focal lens could apply compound lens for optimal optical quality and cutting result.
Modular design with optional collision-proof protective devices or pneumatic knife to realized swiftly switch between welding and cutting.

France MOTOREDUCER

Satellite gears are double-supported on hardened and ground shafts with full-complement needle bearings increasing torsional stiffness.
Backlash ≤ 3 arcmin.
Standard operating temperature range is -15℃ to 45℃.
Protection rated IP 65 standard.

Japan Yaskawa Servo Motor

The increased power demands of large automation components utilize the robust performance of SGM7G.
These servo motors are built with a compact footprint, yet provide a higher torque while maintaining an inertia rating well within the medium range.

France Schneider Electronic Component

Circuit protection against short-circuit currents,
Circuit protection against overload currents,
Breaking and industrial disconnection as per standards IEC/EN 60947-2.
Overvoltage resistance,
High performance limitation,
To fast closing independent of the speed of actuation of the toggle.

Japan SMC pneumatic components

Stepless control of air pressure proportional to an electrical signal.
Serial communications specifications.
Compact/lightweight (Integrated communication parts).

Japan NSK Bearings

These bearing housings have square flange which can be easily attached to a machine with four bolts.
With its simple mounting face, this bearing unit is widely used.

Laser Source

Wavelength range:1070~1090nm
Beam quality TEM00 (M2<1.8)
Forced air/Water cooling
More than 100000 hours work-life of pumped diode

Automatic Lubrication System

Electrical lubrication is a kind of gear pump with rational construction, great performance and comprehensive functions.
By connection with program control system in the main machine, the lubrication system could oversee oil level within tank as well as oil transmission pressure and set lubrication periodicity, which will effectively prevent rust within lubrication system to ensure cutting accuracy.

Laser Cutting System

CypTube pipe cutting software is a three-dimensional pipe cutting software.It can read IGS format file directly,which export by UG,SolidWorks software. Automatic extraction with cutting tube cross section and with cutting trajectory, no need manual editing and selection. Quick and easy peace center correction self-adjustment function ,needn’t fussy manual operation, improving the precision of the cutting.

Application

The equipment can be used for petroleum exploration, tool-processing and utilization.
The machine is specially excellent in cutting stainless steel, carbon steel, alloy steel, aluminum, copper, titanium, or other metal materials. We also accept customized order for the treatment of alloys.

Contact Us